Fiberglass Woven Cloth with Finished Fabric

Philite® is specializing in filtration solutions, this coated fiberglass woven cloth is our new developed products. It is high temperature resistance and anti- acid.
1. Our Capacity: 20000 m² per day.
2. The fabric will be produced by your requirements.
3. Weight: 100-1200 gsm.
4. Thickness: 0.5mm – 20mm.
5. We provide free sample for you for testing.

Optional Choice: Pleated Filter Bag (Star Bag)

The main advantages and features:

1. It is not necessary to reconstruct the box and increase the filter area of the system by 50-150% as needed;

2. The effective bag spacing is greatly increased, and the cleaning efficiency is greatly improved;

3. Extended bag life

Category Woven Filter Cloth Tag Wet Filtration

Get a Quote

Description

Introduction:

Fiberglass filter material is coated on the surface through a special process recipe treated glass fiber fabric composite microporous expanded PTFE film made, which focused on the high-strength glass fiber and low elongation , high temperature resistance, smooth surface corrosion, etc. And PTFE films , water-repellent , breathable, good chemical stability and good characteristics.

Specifications:

Types	Finish	Loss on Lgnition	Weight	Thread Count		Tensile Strength		Air Permeability
		min	(g/m2)	p/inch		Kg/inch		(cfm)
		min	(g/m2)	Warp	Fill	Warp	Fill	(cfm)
ES800	P(PTFE)	10	805	48	40	>220	>220	25-55
ES500	P(PTFE)	10	510	48	24	>220	>110	30-65
ES450	P(PTFE)	10	475	44	24	>200	>110	30-65
ES380	P(PTFE)	10	345	54	30	>120	>100	30-65
ES900	B(Triple)	1.8	850	48	48	>250	>250	20-40
ES800	B(Triple)	1.8	740	48	40	>150	>100	25-55
ES500	B(Triple)	1.8	470	48	24	>180	>80	30-65
ES450	B(Triple)	1.8	435	44	24	>180	>90	40-75
ES380	B(Triple)	1.8	320	54	30	>110	>60	30-70
ES800	AR(Acid Resistance)	4	760	48	40	>220	>200	25-55
ES450	AR(Acid Resistance)	4	450	44	24	>180	>90	40-75
ES380	AR(Acid Resistance)	4	325	54	30	>115	>70	30-65

Features:

High temperature

Due to the stability of fiberglass materials , fiberglass filter bag can be used continuously at 260 ℃ mining

Resistance to corrosion

Glass fiber filter can be used normally ( except hydrofluoric acid and concentrated phosphoric acid ) in acidic and alkaline mining in

Water Solutions

Glass fiber filter has a strong hydrolysis resistance , can be used normally at a relative humidity of 95% mining

The high strength

In the absence of fiberglass woven through the fabric of the destruction of the needling process , the strength is much higher than the fiber filter media and composite

Antioxidant

PPS filter compared to the situation in the coal-fired boiler precipitator easily oxidized , glass fiber material with strong antioxidant properties

The cleaning effect is significant

Glass fiber membrane filter media has a good waterproof , anti- oil properties , the relative humidity near saturation can easily shake off the dust

Dimensionally stable

Glass fiber membrane filter media for high temperature dust filtration , but not because of high temperature deformation , elongation ≤2%

High efficiency

Using PTFE coated glass fiber filter, since the pore size of the film is extremely small, collection efficiency up to 99.999%

Long life

Retroperitoneal fiberglass filter , reducing the accumulation of surface dust and prolong the service life

Cost-effective

Superior performance glass fiber filter , glass fiber filter materials are cheap relative to other prices

Test:

1.Acid Test Method

2.Tear Strength Test

3.Microscope Blow up Strength

Application:

Fiberglass coated fiberglass filter media as an upgrade replacement products, almost ordinary glass fiber filter can be applied to the case , replace glass fiber membrane filter media can be applied. The following is advice for how to choose filter media, if you are interested, please click